Newcon-optik DN483 User Manual

Operation Manual NIGHT VISION RIFLESCOPE DN 482/483 105 Sparks Ave., Toronto, ON, M2H 2S5, Canada

7 6. UNIT ADJUSTMENT ON THE RIFLE The adjustment of the scope should be performed either in the daytime with the lens cap on or in the twilight using

8 7. TAKING PHOTOS AND VIDEO SHOOTING Unit can be supplied with an optional adapter for photo/video cameras for night photo/video shooting. Night p

9 below will help approximately estimate the shutter speed at the diaphragm of 2.0 for your film: Film sensitivity (ISO) 50 100 200 400 800 1600

10 9.6 Bright spots on the screen The image may contain some bright spots caused by gradual relief of static electricity from the cathode. This featu

11 10. WARRANTY NEWCON warrants this product against defects in material and workmanship for one year from the date of the original purchase, but no m

12 12. ACCEPTANCE CERTIFICATE Image Intensifier Tube serial number: ____________________ Minimum Measured Resolution, lines/mm 45 Photocathode s

NEWCON OPTIK ™ 2010 Printed in Canada

ii This page was intentionally left blank

iii IMPORTANT INFORMATION Read prior to activation. DN 482/483 is a sophisticated electronic device. To operate it properly, please read this manual c

iv CONTENTS 1. BRIEF DESCRIPTION...2 1.1 Overview ...

2 1. BRIEF DESCRIPTION 1.1 Overview DN 482/483 Night Vision Scope (the unit) is a modern versatile night vision device designed for a wide range of a

3 2. UNIT EXTERIOR VIEW 5 9 3 4

4 3. DELIVERY SET 3.1 Standard delivery set - Device - Objective lens cap- Rubber eyecup - Picatinny rail mount - Operator’s manual (this document) -

5 4. SPECIFICATIONS General Magnification 3.7x 6.1x Field of view 10º 6.25º Objective lens Focus length 110 mm 165 mm F-number 1.6 2.0 Focus range

6 5. OPERATION INSTRUCTIONS 5.1 Battery installation Unit requires two AA batteries. Prior to installing the batteries make sure they are in good co