Newcon-optik NSN: 5855-20-000-8284 NVS 7 User Manual download pdf (Page 17)

FIGURE 7

1. locking screw

2. flip/flop button

3. flip-flop adjusting screws

4. mount binding screw

1 2 3

Using helmet mount

The unit can be equipped with an optional helmet mount.

This mount can be customized to fit a variety of existing

helmet models.

The mount is attached to a helmet with straps.

The unit is fixed to the mount by a locking screw (1, Fig.

7). To adjust the position of the unit to your eye level use

the screw (4, Fig. 7). To adjust the eye relief first loosen

locking screw (1, Fig. 7) and set a comfortable distance

between the eyes and the eyepiece; then tighten the

locking screw back.

You can fixate the unit in three predetermined positions: vertical,

horizontal, and 15-20 degrees above horizontal. Although the

relative angles between these positions cannot be changed, the

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 23 24

No comments

Newcon-optik NSN: 5855-20-000-8284 NVS 7 User Manual Page 17