11. ACCEPTANCE CERTIFICATE NIGHT VISION DEVICE Serial Number _______________________________ Model DN-140M corresponds to tech
DISCLAIMER The use of this device might be restricted or forbidden in your area. Check with local authority. Newcon Optik will not accept any respo
The image should be restored in within 2 minutes. Poor atmospheric conditions such as fog, haze or extremely dark environments, will decrease the visi
• NEVER aim active unit at intense light sources (i.e. lights, headlamps, campfires, the moon, etc.) • NEVER reverse the polarity of a battery • NEVE
7. Next, focus the scope by turning the focus ring on the sight’s eyepiece. You may have to re-focus both lenses to achieve sharp focus. NOTE: For b
Warning! After transportation or keeping the device at temperature lower than -40°C (-40°F), the device must be warmed up to ambient temperature, fro
6. OPERATION INSTRUCTIONS WARNING! NEVER DIRECT THE LENS IN THE DIRECTION OF BRIGHT LIGHT! 6.1 Starting procedures. 1. Unpack the device. In
4. SPECIFICATIONS OF DN-140M Image intensifier Gen. I Resolution ln/mm 38ln/mm Magnification, X 2.8 Field of View, angle, degrees, not less
Comments to this Manuals